Operation CHARM: Car repair manuals for everyone.

Automatic Transmission/Transaxle







Components
16 Rheostat, instrument lighting; in light switch panel between steering wheel and driver's door
22a Main fuse board, dashboard; on end of dashboard by driver's door
25 Switch, hazard flashers; by center dashboard vent
29 Switch, brake light; on pedal bracket
91 Lamp, selector lever indicator lighting; in floor console by selector lever
134 Switch, brake, cruise control; on pedal bracket
245 Transmission range switch 1, automatic; on transmission casing in engine bay
430 Control module, Trionic 4-cyl; in space (cabin side) in front of windscreen on passenger side
439 Solenoid, selector lever, SHIFT-LOCK; in console for automatic gear selector lever
440 Microswitch, selector lever; in console for automatic gear selector lever
502 Control module, TCM; in space (cabin side) in front of windscreen
506 Switch, WINTER; next to selector lever
531 Solenoid valves, TCM; on bottom of transmission casing
532 Speed sensor, input shaft, transmission; on transmission casing
533 Speed sensor, output shaft, transmission; on transmission casing
535 Temperature sensor, transmission fluid; on bottom of transmission casing
537 witch, SPORT; on top of selector lever
540 Main instrument unit; in front of driver in dashboard
541 SID; in center of dashboard
589 Control module, Trionic 4-cyl (OBD II); in well (cabin side) in front of windscreen on passenger side
600 Control module, Trionic V6; in space (cabin side) in front of windscreen on passenger side
608 Control module, Trionic V6 (OBD II); in space (cabin side) in front of windscreen on passenger side
628 Control module, DICE: above main relay board in dashboard

Connectors
H2-34 In selector lever housing
H6-4 By console for automatic gear selector lever
H10-7 Under battery tray
H16-4 Under battery tray
H42-5 In center of partition (engine bay side)

Crimp Connections
J41 Approx. 200 mm from branching point SID towards MIU
J43 Approx. 220 mm from branching point SID towards MIU
J58 Approx. 50 mm from branching point MIU (12-pin connector) towards data link connector
J65 Approx. 40 mm from branching point MIU (20-pin connector) towards its 12-pin connector
J88 Approx. 10 mm from branching point grounding point G41S towards SID

Grounding Points
G41P Middle grounding screw on center of knee member (in cabin)
G41S Left-hand ground screw on center of knee member (in cabin)
G43 Right-hand grounding bolt in the center of the knee member (inside the cabin)