Rear Silencer

/e8mSourceCode/e8m
Rear Silencer
To remove
1. Raise the car.





2. Mark the underside of the exhaust pipe 95 mm from the joint where it is welded to
3. Cut the exhaust pipe at right angles.
4. Remove the silencer.
5. Clean the cut to remove burrs and dirt.

To fit





1. Fit the new silencer and adjust it so that it hangs straight.
2. Variants with visible tail pipe: Check that the tail pipe is centred in the cut-out in the bumper and that it is in line with the bumper profile.





3. Tighten the nuts on the clamps.