TECH2 Menu, Read Values, Activate, Adj., Prog., and Sys Info.

Tech 2 Menu Structure

Diagnostic Trouble Codes (DTC)
Read Values / Activate
Adjustment
Programming
System Information

Menu "Read Values"

Part 1:

Part 2:

Menu "Activate"


NOTE: When a system function is activated with the diagnostic tool, the control module executes a command that is not functionally normal. In activating mode, the diagnostic tool controls the control module, for which reason the activation command should be used with care. An activated function is always reset after exiting activation mode and another selection is made in the diagnostic tool's menu.







Menu "System information"

Text Function
Part no. Displays SAAB's control module part no.
Control module number Shows the control module version.
Software number Shows the control module software version.
Programming date Shows the date when the MIU was EOL-programmed

Menu "Adjustment"

Diagnostic tool Function
Speedometer Programming and Relearning
Fuel Gauge Adjusting the Fuel Gauge Adjusting the Fuel Gauge/Sensor
LED offset Service and Repair
Fuel Consumption Factor Adjusting Fuel Consumption Display on SID
Coolant Temperature Gauge Adjusting Temperature Gauge
Coolant Temperature Night Panel Adjusting Temperature Gauge/Night Panel
Vehicle Speed Night Panel Adjustments
Engine RPM Night Panel Service and Repair

Menu "Programming"

Diagnostic tool Function
Speedometer Programming and Relearning