Control Arm

/e8mSourceCode/e28m

Tightening Torque





Rear suspension arm mounting to subframe (tighten when car standing on wheels) D; 120 Nm +90° (88 ft. lbs. +90°)
Rear suspension arm bushing to suspension arm E 75 Nm (55 ft. lbs.)
Front suspension arm mounting on subframe (tighten when car standing on wheels); 110 Nm + 90° (81 ft. lbs. + 90°)

Important Always fit a new hubcentre nut if it has been removed because the clamping force of the lock indentations will be reduced if the old one is refitted.