Bush, Longitude Link

/e8mSourceCode/e28m

Bush, longitude link
To remove
1. Remove the longitudinal link.
2. Clamp the longitudinal link in a vice.





3. Saw pieces off the edge of the bush, as shown.
4. User puller 87 91 287 and sleeve 89 96 761 (KM-906-41) to press the bush out.

To fit





1. Position the bushes correctly, see illustration.
2. Press it in using tool KM-906-42 for support.

Note: The rubber will swell on the sides and is completely normal.





3. Fit the longitudinal link.