P1609

P1609 00

CIM or I Bus ECU's Not Added







Fault symptom
The car will not start.

On-board diagnosis

Type of diagnosis:
Continuous

Enable criteria:
Ignition ON.

Fault criteria:
CIM or other ECU on the I-bus not programmed.

Dependent
None

System reaction to a fault:
Starter motor cannot be started.

OK report:
Fault criteria NOT fulfilled.

Fault handling:
Type III
(See Description of On-Board Diagnostics/Fault handling III, "Other emission-related components and functions" for more information.)

Diagnostic help
See "After fitting a control module" under fault diagnosis, general.
See which DTC are stored in the other systems and read their diagnostics information.