P1614

P1614 00

T8 or CIM Not Added







Fault symptom
The car will not start.

On-board diagnosis

Type of diagnosis:
Once per driving cycle.

Enable criteria:
Ignition ON.

Fault criteria:
Incorrect response from CIM.
Immobilizer code does not match between T8 and CIM.

Dependent
None

System reaction to a fault:
Fuel cut off
Starter motor cannot be started.

OK report:
Fault criteria NOT fulfilled.

Diagnostic help
A trouble code is generated if T8/CIM is moved from another car without being "added" using the diagnostic tool.

See "Before changing a control module" and "After fitting a control module" under Fault diagnosis, general.