P0607
DTC P0607 CONTROL MODULE PERFORMANCE1. OUTLINE OF DIAGNOSIS
Judge NG when either the following is completed.
^ When the read value of throttle position sensor 1 signal is mismatched between main CPU and sub CPU.
^ When the read value of accelerator position sensor 1 signal is mismatched between main CPU and sub CPU.
^ When the sub CPU operates abnormally.
^ When the communication between main CPU and sub CPU is abnormal.
^ When the input amplifier circuit of throttle position sensor 1 is abnormal.
^ When the cruise control cannot be canceled correctly.
^ When the signal of brake SW1 and 2 is mismatched.
^ When the directed angle from main CPU is abnormal.
2. COMPONENT DESCRIPTION
3. ENABLE CONDITION
4. GENERAL DRIVING CYCLE
(1) - (4): Always perform the diagnosis continuously.
(5): Always perform the diagnosis continuously on idling.
(6): Perform the diagnosis when the brake pedal is depressed.
(7): Always perform the diagnosis continuously.
5. DIAGNOSTIC METHOD
Judge OK and clear NG when the malfunction criteria below are completed.
6. DTC CLEAR CONDITION
^ When the OK idling cycle was completed 40 times in a row
^ When "Clear Memory" was performed
7. MALFUNCTION INDICATOR LIGHT CLEAR CONDITION
^ When the OK driving cycle was completed 3 times in a row
^ When "Clear Memory" was performed
8. FAIL SAFE
Stop the current to electronic throttle control motor. (Fix the throttle opening angle to 6 degrees.)
9. ECM OPERATION AT DTC SETTING
Memorize the freeze frame data. (For test mode $02)