Fog/Driving Lamp: Service and Repair

Front Fog Lamp Replacement

Removal Procedure




1. Remove the fog lamp bezel. Refer to Front Bumper Fascia Extension Replacement ().
2. Disconnect the electrical connector.
3. Remove the fog lamp bulb (2). Refer to Front Fog Lamp Bulb Replacement (Service and Repair).
4. Remove the two screws (3) from the fog lamp (1).
5. Remove the fog lamp from the fascia.

Installation Procedure




1. Position the fog lamp to the fascia.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the screws (3) to the fog lamp (1).

Tighten the bolts to 2 Nm (18 in. lbs.).

3. Install the fog lamp bulb (2). Refer to Front Fog Lamp Bulb Replacement (Service and Repair).
4. Connect the electrical connector.
5. Aim the fog lamp(s). Refer to Fog Lamp Aiming (Adjustments).
6. Install the fog lamp bezel. Refer to Front Bumper Fascia Extension Replacement ().