Air Cleaner Fresh Air Duct/Hose: Service and Repair

Air Cleaner Resonator Outlet Duct Replacement

Removal Procedure




1. Disconnect the positive crankcase ventilation (PCV) fresh air tube (2) from the air cleaner resonator outlet duct (1).




2. Loosen the clamps at the following:

* Mass air flow (MAF)/intake air temperature (IAT) sensor
* Throttle body

3. Remove the air cleaner outlet duct bolt.
4. Remove the air cleaner outlet duct.

Installation Procedure




1. Install the air cleaner outlet duct.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the air cleaner outlet duct bolt.

Tighten the bolt to 10 Nm (89 in. lbs.).

3. Tighten the clamps at the following:

* MAF/IAT sensor
* Throttle body

Tighten the clamps to 7 Nm (62 in. lbs.).




4. Connect the PCV fresh air tube (2) to the air cleaner resonator outlet duct (1).