Daytime Running Lamps (DRL)

The Daytime Running Lights (DRL) On telltale is controlled by the DRL logic located on the speedometer printed circuit board. The telltale will be On whenever DRL is in operation.

The DRL On telltale will turn Off if the High or Low Beams headlamps are activated or if a High Beam Headlamp fails however, if both high beams fail the DRL will turn On again. This is because the DRL circuitry is unable to identify this condition.

NOTE: Low resistance high beam bulbs or high charging system voltage can cause a flickering DRL telltale.