Battery Negative Cable Replacement (Battery to Battery Tray)

BATTERY NEGATIVE CABLE REPLACEMENT (BATTERY TO BATTERY TRAY)

REMOVAL PROCEDURE

IMPORTANT:
- Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
- Always route the replacement cable the same way as the original cable.




1. Disconnect the negative battery cable.
2. Remove the negative battery cable ground bolt (3).
3. Remove the negative battery cable.

INSTALLATION PROCEDURE




1. Install the negative battery cable. Ensure that the anti-rotation tab on the terminal (4) is correctly located.
2. Install the negative battery cable ground bolt (3).

Tighten the bolt to 17 N.m (13 lb ft).

NOTE: Refer to Fastener Notice.

3. Connect the negative battery cable.