Installation
2AZ-FE LUBRICATION: OIL PUMP: INSTALLATION
INSTALLATION
1. INSTALL OIL PUMP ASSEMBLY
(a) Install a new gasket and the oil pump with the 3 bolts.
Torque: 19 Nm (194 kgf-cm, 14 ft-lbf)
2. INSTALL NO. 2 CHAIN SUB-ASSEMBLY Installation
3. INSTALL CRANKSHAFT TIMING GEAR OR SPROCKET Installation
4. INSTALL NO. 1 CHAIN VIBRATION DAMPER Installation
5. INSTALL CHAIN SUB-ASSEMBLY Installation
6. INSTALL CHAIN TENSIONER SLIPPER Installation
7. INSTALL TIMING CHAIN GUIDE Installation
8. INSTALL NO. 1 CRANKSHAFT POSITION SENSOR PLATE Installation
9. INSTALL TIMING CHAIN OR BELT COVER SUB-ASSEMBLY Installation
10. INSTALL NO. 1 CHAIN TENSIONER ASSEMBLY Installation
11. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY Installation
12. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING BRACKET Installation
13. INSTALL CRANKSHAFT PULLEY Installation
14. INSTALL OIL PAN SUB-ASSEMBLY Installation
15. INSTALL CRANKSHAFT POSITION SENSOR Installation
16. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY Installation
17. INSTALL IDLER PULLEY SUB-ASSEMBLY Installation
18. INSTALL ENGINE MOUNTING INSULATOR SUB-ASSEMBLY RH Installation
19. INSTALL FRONT ENGINE MOUNTING INSULATOR SUB-ASSEMBLY Installation
20. INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY Installation
21. INSTALL SPARK PLUG Installation
22. INSTALL IGNITION COIL ASSEMBLY Installation
23. INSTALL RADIATOR RESERVE TANK ASSEMBLY Installation
24. INSTALL GENERATOR ASSEMBLY
25. INSTALL FAN AND GENERATOR V BELT Installation
26. INSTALL FRONT EXHAUST PIPE ASSEMBLY Installation
27. INSTALL CENTER EXHAUST PIPE ASSEMBLY Installation
28. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
29. ADD ENGINE OIL Replacement
30. INSPECT FOR ENGINE OIL LEAK
31. INSPECT FOR EXHAUST GAS LEAK
32. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation
33. INSTALL FRONT WHEEL RH
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)
34. INSTALL REAR ENGINE UNDER COVER RH
35. INSTALL NO. 1 ENGINE UNDER COVER
36. INSTALL HOOD Installation
37. INSPECT HOOD
38. ADJUST HOOD