Cylinder Head

CYLINDER HEAD





Using several steps, uniformly install and tighten the 10 cylinder head set bolts and plate washers with a 10 mm bi-hexagon wrench in the order shown in the illustration.

Torque: 70 Nm (714 kgf-cm, 52 ft-lbf)






Mark the front of the cylinder head bolts with paint.
Further tighten the cylinder head bolts by 90° as shown in the illustration.
Check that the paint mark is now at a 90° angle to the front.

CYLINDER HEAD COVER SUB-ASSEMBLY





Bolt A - Torque: 11 Nm (112 kgf-cm, 8 ft-lbf)
Bolt B - Torque: 14 Nm (143 kgf-cm, 10 ft-lbf)
Nut - Torque: 11 Nm (112 kgf-cm, 8 ft-lbf)