Axle Nut
FRONT AXLE HUB NUTUsing a socket wrench (30 mm), install a new axle hub nut.
Torque: 216 Nm (2203 kgf-cm, 160 ft-lbf)
HINT: Stake the nut after inspecting for looseness and runout in the following steps.
Using a chisel and hammer, stake the axle hub nut.
REAR AXLE HUB
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
Install Rear Axle Hub And Bearing Assembly
Install the hub and bearing assembly with the 4 bolts.
Torque: 90 Nm (918 kgf-cm, 67 ft-lbf)
NOTE: Do not place the hub and bearing's magnet rotor side so that it is facing downward, and do not allow the magnet rotor side to become damaged or contact foreign matter.