Replacement

U241E AUTOMATIC TRANSAXLE: DIFFERENTIAL OIL SEAL: REPLACEMENT

1. REMOVE FRONT DRIVE SHAFT ASSEMBLY

HINT
See the steps from "DRAIN AUTOMATIC TRANSAXLE FLUID" through "FIX FRONT AXLE ASSEMBLY" ( Removal).

2. REMOVE DRIVE SHAFT BEARING BRACKET

(a) Remove the 3 bolts and remove the drive shaft bearing bracket.





3. REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL

(a) Using SST, remove the differential side bearing retainer oil seal.





SST : 09308-00010

4. REMOVE TRANSAXLE HOUSING OIL SEAL

(a) Using SST, remove the transaxle housing oil seal.





SST : 09308-00010

5. INSTALL TRANSAXLE HOUSING OIL SEAL

(a) Coat the lip of a new transaxle housing oil seal with MP grease.

(b) Using SST and a hammer, install the transaxle housing oil seal.





SST : 09608-32010

SST : 09950-70010

09951-07150

Drive in depth:

-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

NOTICE:
Do not damage the oil seal lip.

6. INSTALL DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL

(a) Coat the lip of a new differential side bearing retainer oil seal with MP grease.

(b) Using SST and a hammer, install the differential side bearing retainer oil seal.





SST : 09608-32010

SST : 09950-70010

09951-07150

Drive in depth:

-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

NOTICE:
Do not damage the oil seal lip.

7. INSTALL DRIVE SHAFT BEARING BRACKET

(a) Install the drive shaft bearing bracket with the 3 bolts.





Torque : 64 Nm (653 kgf-cm, 47 ft-lbf)

8. INSTALL FRONT DRIVE SHAFT ASSEMBLY

HINT
See the steps from "INSTALL FRONT DRIVE SHAFT ASSEMBLY LH" through "INSTALL NO. 1 ENGINE UNDER COVER" ( Installation).