Installation

1NR-FE EMISSION CONTROL: CANISTER: INSTALLATION

1. INSTALL CHARCOAL CANISTER ASSEMBLY

(a) Install the charcoal canister assembly with the 3 bolts.

Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)

(b) Connect the connector and engage the clamp.

2. CONNECT FUEL EMISSION HOSE

(a) Connect the fuel emission hose to the charcoal canister with the hose clamp.





Text in Illustration





HINT
Perform the installation with the hose clip at the correct angle.

3. CONNECT NO. 2 CHARCOAL CANISTER FILTER

(a) Connect the No. 2 charcoal canister filter and lock it by pushing in the retainer.









NOTICE:
* Check that there are no scratches or foreign objects on the connecting part.
* Check that the charcoal canister outlet tube is inserted securely.
* Check that the charcoal canister outlet tube is securely connected by pulling on it.

4. CONNECT FUEL TANK VENT HOSE

(a) Connect the fuel tank vent hose and lock it by pushing in the retainer.





Text in Illustration





NOTICE:
* Check that there are no scratches or foreign objects on the connecting part.
* Check that the fuel tank vent hose is inserted securely.
* After installing the retainer, check that the fuel tank vent hose is securely connected by pulling on it.

HINT
* Insert the inlet tube until a "click" sound is heard.
* The quick connector cannot be locked when the tube is not inserted securely.