Installation

EXTERIOR: REAR BUMPER: INSTALLATION

1. INSTALL REAR BUMPER COVER

(a) Engage the 12 claws and install the rear bumper cover.

(b) Install the 4 clips.

(c) Install the pin hold clip.





NOTICE:
Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

HINT
Use the same procedure for the remaining part.

(d) Install the screw.

HINT
Use the same procedure for the remaining part.

(e) Tighten the 2 bolts.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

2. INSTALL REAR BUMPER PLATE LH

(a) Engage the 2 claws and install the rear bumper plate.

3. INSTALL REAR BUMPER PLATE RH

HINT
Use the same procedure as for the LH side.