Removal

2AZ-FE EXHAUST: EXHAUST PIPE: REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER

2. REMOVE HEATED OXYGEN SENSOR Removal

3. REMOVE TAIL EXHAUST PIPE ASSEMBLY

(a) Remove the 2 bolts.





(b) Separate the No. 4 exhaust pipe support and remove the tail exhaust pipe assembly.

(c) Remove the exhaust pipe gasket from the No. 2 center exhaust pipe assembly.

4. REMOVE TAIL PIPE BAFFLE

(a) Using a plastic hammer, uniformly tap out and remove the tail pipe baffle.





5. REMOVE NO. 2 CENTER EXHAUST PIPE ASSEMBLY

(a) Remove the 2 bolts and 2 compression springs.





(b) Separate the No. 4 exhaust pipe support and remove the No. 2 center exhaust pipe assembly.

(c) Remove the exhaust pipe gasket from the center exhaust pipe assembly.

6. REMOVE FRONT FLOOR CENTER BRACE

(a) Remove the 4 bolts and the front floor center brace.





7. REMOVE CENTER EXHAUST PIPE ASSEMBLY

(a) Remove the 2 bolts.





(b) Separate the 2 No. 4 exhaust pipe supports and remove the center exhaust pipe assembly.

(c) Remove the exhaust pipe gasket from the front exhaust pipe assembly.

8. REMOVE FRONT EXHAUST PIPE ASSEMBLY

(a) Remove the 2 bolts, 2 compression springs and the front exhaust pipe assembly.





(b) Remove the exhaust pipe gasket from the exhaust manifold converter sub-assembly.