C2176

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: C2176; Receiver Error; 2013 MY FR-S [03/2012 -]
C2176 - Receiver Error

DESCRIPTION

The signals are transmitted to the door control receiver in the vehicle as radio waves.





INSPECTION PROCEDURE

NOTICE:
* When replacing the door control receiver, read the IDs stored in the old ECU using the Techstream and write them down before removal.
* It is necessary to perform registration Programming and Relearning of the transmitter IDs into the tire pressure warning ECU after the ECU has been replaced.
* When replacing the door control receiver on vehicles, be sure to perform Registration of Recognition Code to register the transmitter IDs after ECU replacement Registration.

PROCEDURE

1. CHECK DTC OUTPUT (C2176)

(a) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.

(b) Turn the ignition switch off.

(c) Turn the ignition switch to ON and check for DTCs Reading and Clearing Diagnostic Trouble Codes.

OK:

DTC C2176 is not output.

NG -- REPLACE DOOR CONTROL RECEIVER Removal

OK -- END