Transmission Position Sensor/Switch: Adjustments

TX6A AUTOMATIC TRANSMISSION / TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: ADJUSTMENT; 2013 MY FR-S [03/2012 -]

1. DISCONNECT TRANSMISSION CONTROL SHAFT LEVER RH

(a) While pushing the shift lock release button, move the shift lever to N.

(b) Remove the nut and spring washer, and disconnect the transmission control shaft lever RH.





2. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY

(a) Remove the bolt of the park/neutral position switch assembly.





(b) Clean the bolt and the bolt hole.

(c) Apply adhesive to 2 or 3 threads on the end of the bolt.









Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

(d) Align the neutral basic line with the groove as shown in the illustration.









(e) Hold the park/neutral position switch assembly in position and install the bolt.

Torque : 13 Nm (130 kgf-cm, 9 ft-lbf)

3. CONNECT TRANSMISSION CONTROL SHAFT LEVER RH

(a) Connect the transmission control shaft lever RH with the spring washer and nut.

Torque : 16 Nm (160 kgf-cm, 12 ft-lbf)

4. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY Initial Inspection and Diagnostic Overview