Installation

TL70 MANUAL TRANSMISSION / TRANSAXLE: BACK-UP LIGHT SWITCH: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL BACK-UP LIGHT SWITCH ASSEMBLY

(a) Using a 19 mm union nut wrench, install the back-up light switch assembly with a new gasket to the manual transmission assembly.

Torque : 32 Nm (329 kgf-cm, 24 ft-lbf)

NOTICE:
Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Service Precautions.

(b) In the order indicated in the illustration, engage the 3 clamps in place, and connect the back-up light switch assembly wire and neutral position switch assembly wire.





HINT
Install the wire harness so that there is slack on the connector side.

2. INSTALL MANUAL TRANSMISSION ASSEMBLY

Installation