Evaporative Emissions System: Service and Repair

Fuel Lines:

Fuel Tank:

1. Loosen clips on hose and tube at front and rear of center pipe. Cap hose leading to tank to prevent fuel spillage.
2. Remove the following:
^ Heater
^ Carpet
^ side sill cover
^ Rear seat
^ Fuel filler pipe cover
3. Remove three clamps securing pipe to firewall and remove grommet from firewall.
4. Remove five clamps securing pipe to front pillar and side sill. Remove grommet from bulkhead.
5. Remove tubing.
6. Reverse order to install.