Hydraulic Application Type

HYDRAULIC APPLICATION TYPE





1) Inspect free play of clutch pedal by operating pedal by hand.
If it is out of the specified value, loosen lock nut for push rod and adjust push rod by turning in the direction that shortens or lengthens it.

Standard of free play: 3 - 15 mm (0.12 - 0.59 in)
Tightening torque (Adjusting nut): 9 - 11 Nm (6.5 - 8.0 ft-lb)

2) Check the fluid level using the scale on the outside of the clutch master cylinder tank.
If the level is below "MIN", add clutch fluid to bring it up to "MAX".

Recommended clutch fluid: Fresh DOT3 or DOT4 brake fluid

a. Avoid mixing different brands of brake fluid to prevent degradation of the fluid.
b. Be careful not to allow dirt or dust to get into the reservoir tank.
c. Use fresh DOT3 or D0T4 brake fluid when refilling fluid.