Mechanical Application Type

MECHANICAL APPLICATION TYPE








Inspect free play of clutch pedal by operating pedal by hand.
If it is out of the specified value, adjust it by turning the adjusting nut on engine side end of clutch cable release fork.

Standard of free play:
At clutch pedal: 10 - 20 mm (0.39 - 0.79 in)
At center of cable on clutch release fork: 3 - 4 mm (0.12 - 0.16 in)

Tightening torque (Adjusting nut on release fork): 5.4 - 9.3 Nm (4.0 - 6.9 ft-lb)

^ When replacing clutch cable with new one and/or making free play adjustment of clutch pedal, always check the adjustment of hill-holder system. Refer to Brakes/Hydraulic System/Pressure Hold Valve.
^ After replacing clutch cable and/or pressure hold valve (PHV) cable with new one, depress clutch pedal about thirty (30) times as a running-in operation prior to this adjustment