Basic Diagnostics Procedure

BASIC DIAGNOSTICS PROCEDURE






* When more than one trouble code is outputted, begin diagnostics with the smallest trouble code number and proceed to the next higher code.
After correcting each problem, conduct the D-CHECK and ensure that the corresponding trouble code no longer appears.

** When a trouble code is displayed in the READ MEMORY MODE, conduct diagnostics measures which correspond with the code

CAUTION: Check the connector while it is connected unless specified otherwise. Be sure to check again from the beginning in order to prevent secondary trouble caused by repair work.






How to Read Trouble Codes of Indicator Light
The Malfunction Indicator Lamp flashes the code corresponding to the faulty parts. The long segment (1.3 seconds "ON") indicates a "ten", and the short segment (0.2 seconds "ON") signifies "one". And middle segment (0.5 seconds "ON") means OK code.







LIST OF TROUBLE CODES






READ MEMORY MODE






D-CHECK MODE






CLEAR MEMORY MODE