Symptom Related Diagnostic Procedures

A: REPLACEMENT

CAUTION:
^ The FMVSS No. 116, fresh DOT3 or 4 brake fluid must be used.
^ Cover bleeder with waste cloth, when loosening it, to prevent brake fluid from being splashed over surrounding parts.
^ Avoid mixing different brands of brake fluid to prevent degrading the quality of the fluid.
^ Be careful not to allow dirt or dust to get into the reservoir tank.

NOTE:
^ During bleeding operation, keep the clutch reservoir tank filled with brake fluid to eliminate entry of air.
^ Clutch pedal operating must be very slow.
^ For convenience and safety, it is advisable to have two men working.
^ The amount of brake fluid required is approximately 70 ml (2-4 US fl oz, 2.5 Imp fl oz) for total clutch system.

1. Either jack-up vehicle and place a safety stand under it, or lift-up vehicle.
2. Remove both front and rear wheels.
3. Draw out the brake fluid from reservoir tank with syringe.
4. Refill reservoir tank with recommended brake fluid.

Recommended brake fluid.
FMVSS No. 116, fresh DOT3 or 4 brake fluid

5. Bleed air from oil line with the help of a coworker.