Marker Lamp: Service and Repair

REAR FINISHER LIGHT (SEDAN BODY)
1. Open the trunk lid.
2. Remove cover (A).
3. Disconnect connector (B) from rear finisher light.




4. Remove ten nuts and then detach rear finisher light from trunk lid.
5. Installation is in the reverse order of removal.

REAR FINISHER LIGHT (WAGON BODY)




1. Remove rear gate trim lower (A).
2. Disconnect connector from rear finisher light.




3. Remove bolts (A) and then remove rear finisher light from rear gate.
4. Installation is in the reverse order of removal.