Fail-Safe Function

1. NORMAL CANCELING FUNCTION
- In the following states, the system is canceled.

1. Brake pedal is depressed.
2. Clutch pedal is depressed. (MT model)
3. Selector lever is in P" or "N" position. (AT model)
4. Cruise control main switch is turned off.

2. AUTO CANCELING FUNCTION
- In the following states, the system is canceled.

1. Vehicle speed lowers below the mm. system operation speed.
2. Vehicle speed lowers 15 ± 3 kmph than the set speed.

3. FAIL SAFE CANCELING FUNCTION
- In the following states, the system is canceled.

1. Fault occurs in the cruise control module.
1. The condition of the actuator drive circuit does not coincide with the output condition of CPU.
2. Fault occurs in the command switch input circuit.
3. Set speed (CPU RAM value) is abnormal.
4. Fault occurs in the cancel latch circuit.

2. Abnormality occurs in the vehicle speed input.
- In the following state, the system is temporarily canceled.
1. Vehicle speed becomes 10 kmph higher than the set speed.
In this case, the system resumes operation when the vehicle speed becomes lower than the set speed + 7 kmph.