Current Data For Engine (Normal Mode)

READ CURRENT DATA FOR ENGINE (NORMAL MODE)
1. On the �Main Menu� display screen, select the {Each System Check} and press the [YES] key.
2. On the �System Selection Menu� display screen, select the {Engine Control System} and press the [YES] key.
3. Press the [YES] key after displayed the information of engine type.
4. On the �Engine Diagnosis� display screen, select the {Current Data Display & Save} and press the [YES] key.
5. On the �Data Display Menu� display screen, select the {Data Display} and press the [YES] key.
6. Using the scroll key, move the display screen up or down until the desired data is shown.

SUPPORT DATA - Part 1:

SUPPORT DATA - Part 2:

A list of the support data is shown in the table.

NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
For select monitor display details, refer to Subaru Select Monitor Display Details.
Subaru Select Monitor Display Details