Outer Belt

OUTER BELT (FRONT)

REMOVAL

1. Fold backrest all the way forward, and then move front seat all the way forward.
2. Turn ignition switch OFF, disconnect ground cable from battery, and wait for more than 20 seconds before starting work.
3. Remove center pillar lower trim.









4. Remove webbing guide.






5. Remove anchor cover. Loosen shoulder anchor bolt, and then detach shoulder anchor from center pillar.






6. Turn over the floor mat to remove bolt.
7. Disconnect yellow connector of pretensioner harness, and remove outer belt (front).

CAUTION: Do not drop or apply any impact to pretensioner.
Pretensioner and bracket should be treated as an assembly. Do not attempt to disassemble it.



INSTALLATION
Install in the reverse order of removal.

CAUTION: The parts on left and right are not identical. Before installation, make sure that the correct part is used
Be careful not to twist belts during installation.