Read Current Data

READ CURRENT DATA
1. On the [[Main Menu,> display screen, select the {Each System Check} and press the [YES] key.
2. On the [[System Selection Menu,, display screen, select the {Transmission Control System} and press the [YES] key.
3. Press the [YES] key after displayed the information of transmission type.
4. On the [[Transmission Diagnosis]] display screen, select the {Current Data Display & Save} and press the [YES] key.
5. On the [[Data Display Menu,, display screen, select the {Data Display} and press the [YES] key.
6. Using the scroll key, move the display screen up or down until the desired data is shown.
^ A list of the support data is shown in the following table.

NOTE: For detailed operation procedure, refer to the SELECT MONITOR OPERATION MANUAL.