> on the Subaru Select Monitor, select the {2. Check individual system} -> {7. Keyless unit mode} -> {8. Keyless transmitter ID registration}, and press the [YES] key.
4. Input the 8-digit ID number from the left, which is attached to the plastic bag of the keyless transmitter to the transmitter inner circuit board, then press the [YES] key.

NOTE: Press the [/\] key on the Subaru Select Monitor to increase the number, and the [\/] key to decrease. Press the [<] key to move to the digit in the left, and[>] to the right.

5. The ID number you have entered will be shown.Make sure that the ID number shown is the same as the plastic bag.
6. Press the [YES] key if the ID number is correct.Press the [NO] key if incorrect, to return to the step3) and try again.
7. <> is displayed and registration starts.
8. <> will be displayed when the registration process is done.
9. To exit, select <>, and press the [NO]key to return to {8. Keyless transmitter ID registration}. If there are additional keyless transmitters to be registered, select <>, and press the [YES] key to return to the step 3).

NOTE:
- If the registration fails, <> will be shown. Press the [YES] key to return to the {8. Transmitter ID registration}. And retry from the step 2).
- <> is shown on the Subaru Select Monitor when fourth keyless transmitter has been registered. Press the [NO] key to return to {8. Keyless transmitter ID registration}.