Differential Gear Oil Inspection
Differential Gear OilINSPECTION
1. Remove the filler plug, and then check the gear oil. If it is contaminated or deteriorated, replace the gear oil.
2. Check that the gear oil level is up to the bottom of filler plug or the oil temperature switch hole. If the level is low, refill up to the bottom of filler plug.
3. When checking is completed, tighten the filler plug.
NOTE: Apply liquid gasket to the drain plug.
Liquid gasket. Three Bond 1105 (Part No. 004403010) or equivalent
Tightening torque: 49 Nm (5.0 kgf-m, 36.2 ft. lbs.)