With Manufacturer's Scan Tool

Read Diagnostic Trouble Code (DTC)

OPERATION

1. SUBARU SELECT MONITOR (NORMAL MODE)

1. On Main Menu display screen, select the {Each System Check} and press the [YES] key.
2. On System Selection Menu display screen, select the {Engine Control System} and press the [YES] key.
3. Press the [YES] key after the information of engine type is displayed.
4. On Engine Diagnosis display screen, select the {Diagnostic Code(s) Display} and press the [YES] key.
5. On Diagnostic Code(s) Display display screen, select the {Current Diagnostic Code(s)} or {History Diagnostic Code(s)} and press the [YES] key.

NOTE:
- For detailed operation procedure, refer to SUBARU SELECT MONITOR OPERATION MANUAL.
- For details concerning DTC, refer to the List of Diagnostic Trouble Code (DTC). List of Diagnostic Trouble Code (DTC)

2. SUBARU SELECT MONITOR (OBD MODE)

1. On Main Menu display screen, select the {2. Each System Check} and press the [YES] key.
2. On System Selection Menu display screen, select the {Engine Control System} and press the [YES] key.
3. Press the [YES] key after the information of engine type is displayed.
4. On Engine Diagnosis display screen, select the {OBD System} and press the [YES] key.
5. On OBD Menu display screen, select the {Diagnosis Code(s) Display} and press the [YES] key.
6. Make sure that a DTC is shown on display screen.

NOTE:
- For detailed operation procedure, refer to SUBARU SELECT MONITOR OPERATION MANUAL.
- For details concerning DTC, refer to the List of Diagnostic Trouble Code (DTC). List of Diagnostic Trouble Code (DTC)