Suspension - Rear Stabilizer Installation Change
NUMBER: 05-38-07DATE: 04/05/07
APPLICABILITY:
2007MY and Later Tribeca
SUBJECT:
Rear Stabilizer Bar Installation Procedure Change
INTRODUCTION
The purpose of this bulletin is to provide the change in the procedure when installing a rear stabilizer bar. This change is the result of the stabilizer stoppers being discontinued.
PRODUCTION LINE CHANGE
The stabilizer stoppers have been eliminated from production starting in September; 2006 with VIN # 74409531.
PARTS INFORMATION
The part number has not changed.
REPAIR PROCEDURE/INFORMATION
When installing the stabilizer bar into the stabilizer bushing make sure the edge of the orange paint mark on the stabilizer bar is aligned with the edge of the stabilizer bushing.
Disclaimer