Fuel Level Sensor

Fuel Level Sensor

REMOVAL

WARNING: Place "NO OPEN FLAMES" signs near the working area.

CAUTION:
- Be careful not to spill fuel.
- Prior to start work, be sure to set the fuel volume to three-forth full of the fuel tank. If the fuel is more than three-forth full of the fuel tank, be careful because the fuel may spill out.

NOTE: The fuel level sensor is built in fuel pump assembly.




1. Remove the fuel pump assembly.
2. Disconnect the connector from fuel pump bracket.
3. Remove the fuel temperature sensor.
4. Remove the fuel level sensor.

INSTALLATION
Install in the reverse order of removal.