Seats: Service Precautions
CAUTION1. DRIVER'S SEAT
- When removing the front seat from a side airbag loaded vehicle, follow cautions given in the airbag section.
- Do not remove the seat position sensor from the seat rail.
2. PASSENGER'S SEAT
- When removing the front seat from a side airbag loaded vehicle, follow cautions given in the airbag section.
- If the seat cushion cover is removed or replaced, make sure to perform occupant detection system adjustment after installing the seat to the vehicle.
Failure to do so may cause improper operation of the occupant detection system.
- On the passenger's seat, never remove the occupant detection control module or the pressure sensor from the occupant detection cushion assembly. These are fixed to the occupant detection cushion assembly.
- Do not replace the seat cushion pad by itself. Always replace the occupant detection cushion assembly as a unit. The seat cushion pad, occupant detection sensor, occupant detection control module and seat cushion cover are adjusted as a set at the time of manufacture. If parts from other vehicles or from other sets are used, the occupant detection system will not function properly.
- If the seat cushion cover is removed (including when replacing the heater), always replace the wires of the seat cushion cover with new wires.