> display screen, select the {Each System Check}.
2. On the <> display screen, select the {Engine Control System}.
3. Click the [OK] button after the information of engine type has been displayed.
4. On the <> display screen, select the {Diagnostic Code(s) Display}.
5. On the <> screen, select the {Temporary Code} or {Memory Code}.

NOTE:
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". DTC List - Engine Controls

2. SUBARU SELECT MONITOR (OBD MODE)
1. On the <

> display screen, select the {Each System Check}.
2. On the <> display screen, select the {Engine Control System}.
3. Click the [OK] button after the information of engine type has been displayed.
4. On the <> display screen, select the {OBD System}.
5. On the <> display screen, select the {Diagnostic Code(s) Display}.
6. Make sure DTC is shown on the screen.

NOTE:
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". DTC List - Engine Controls