Initial Inspection and Diagnostic Overview

Combination Meter System

INSPECTION

1. SELF-DIAGNOSIS
The self-diagnosis (checking of each meter, warning light, indicator, illumination, LCD) of combination meter can be performed in the following procedure.

NOTE: Perform the steps described in 2) and 4) within 10 seconds.

1. Within 3 seconds after turning the ignition switch to ON, set the lighting switch to tail light or headlight position.
2. Press the odo/tripmeter knob three times.
3. Turn the lighting switch to OFF, and press the odo/trip meter knob three times.
4. Set the lighting switch to tail light or headlight position again, and press the odo/tripmeter knob three times.

NOTE:
- When pressing the odo/trip meter knob four times, the display changes to DTC display mode.
- When the self-diagnosis function operates, the warning light, indicator, and LCD display checks are performed. After this, operation checks are performed in the order of buzzer sounding 0.5 seconds, meter needle operation, meter needle indicate, LCD for each press of the odo/trip meter knob button. Turn the ignition switch to OFF to cancel the self-diagnosis function.
- When the engine starts during diagnosis, the self-diagnosis function is not cancelled, however, once the vehicle starts driving, the self-diagnosis function is deactivated automatically for safety.

5. Move to "Check the meter needle operation".
Check the meter operation, warning light, indicator light, LCD.






6. Press the odo/tripmeter knob once.
7. Move to "Check the meter needle indication".
Check the meter operation, warning light, indicator light, LCD.

NOTE:
- Meter needle indication switches each 1.5 seconds.
- ILL illuminating level is illuminates changes to "Check the meter needle indication".






8. Press the odo/tripmeter knob once.
9. Move to "Check the LCD display".
Check the LCD.

NOTE:
- All warning lights and indicator lights are extinguished.
- Meter needle indication hold the "Check the meter needle indication" position.
- ILL illumination level lights the ILL6 (highest brightness).