Muffler: Service and Repair

Muffler








REMOVAL

CAUTION: Be careful not to burn yourself, because the exhaust pipe becomes extremely hot after running.

1) Set the vehicle on a lift.
2) Lift up the vehicle.
3) Separate the muffler from rear exhaust pipe.








4) Apply a coat of spray type lubricant to the mating area of cushion rubber.








5) Remove the front and rear cushion rubber, and then remove the muffler.

INSTALLATION
Install in the reverse order of removal.

NOTE:
^ Use a new gasket and self-locking nut.
^ After assembling, degrease the lubricant which was applied to the cushion rubber while removing/installing.








INSPECTION
1) Check the connections and welds for exhaust leaks.
2) Make sure there are no holes or rusting.
3) Check the cushion rubber for wear or crack.