Control Module: Service and Repair

Transmission Control Module (TCM)

REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the lower cover and then disconnect the connector.
3) Disconnect the connector from TCM.





4) Remove the TCM.

INSTALLATION
1) Install the TCM.





2) Connect the connector to the TCM.
3) Install in the reverse order of removal.
4) Perform Clear Memory 2 operation.
5) Execute the learning control promotion.
6) Perform the inspection at the end of repair work, and make sure there is no faulty as below;
^ Excessive shift shock
^ Oil leakage from the transmission body, etc.
^ Occurrence of noise caused by interference etc.