With Manufacturer's Scan Tool

Read Diagnostic Trouble Code (DTC)

OPERATION

1. SUBARU SELECT MONITOR (NORMAL MODE)
1. On the {{Main Menu}} display screen, select the {Each System Check}.
2. On the {{System Selection Menu}} display screen, select the {Engine Control System}.
3. Click the [OK] button after the information of engine type has been displayed.
4. On the {{Engine Diagnosis}} display screen, select the {Diagnostic Code(s) Display}.
5. On the {{Diagnostic Trouble Code}} screen, select {Temporary Code} or {Memory Code}.

NOTE:
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". DTC List - Engine Controls

2. SUBARU SELECT MONITOR (OBD MODE)
1. On the {{Main Menu}} display screen, select the {Each System Check}.
2. On the {{System Selection Menu}} display screen, select the {Engine Control System}.
3. Click the [OK] button after the information of engine type has been displayed.
4. On the {{Engine Diagnosis}} display screen, select the {OBD System}.
5. On the {{OBD Menu}} display screen, select the {Diagnostic Code(s) Display}.
6. Make sure DTC is shown on the screen.

NOTE:
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". DTC List - Engine Controls