With Manufacturer's Scan Tool

Clear Memory Mode

OPERATION

1. SUBARU SELECT MONITOR (NORMAL MODE)
1. On the {{Main Menu}} display screen, select the {Each System Check}.
2. On the {{System Selection Menu}} display screen, select the {Engine Control System}.
3. Click the [OK] button after the information of engine type has been displayed.
4. On the {{Engine Diagnosis}} display screen, select the {Clear Memory}.
5. When the "Clear Memory?" is shown on the screen, click the [Yes] button.
6. When "Done" and "Turn ignition switch to OFF" is shown on the display screen, turn the ignition switch to OFF.

NOTE:
- Initial diagnosis of electronic throttle control is performed after memory clearance. Therefore, start the engine 10 seconds or more after have turning the ignition switch to ON.
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".

2. SUBARU SELECT MONITOR (OBD MODE)
1. On the {{Main Menu}} display screen, select the {Each System Check}.
2. On the {{System Selection Menu}} display screen, select the {Engine Control System}.
3. Click the [OK] button after the information of engine type has been displayed.
4. On the {{Engine Diagnosis}} display screen, select the {OBD System}.
5. On the {{OBD Menu}} display screen, select the {Clear Diagnostic Code?}.
6. When the "Clear Diagnostic Code?" is shown on the screen, click the [Yes] button.
7. When "Done" and "Turn ignition switch to OFF" is shown on the display screen, turn the ignition switch to OFF.

NOTE:
- Initial diagnosis of electronic throttle control is performed after memory clearance. Therefore, start the engine 10 seconds or more after have turning the ignition switch to ON.
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".