Installation
ATF Cooler Pipe and HoseINSTALLATION
1) Install the ATF cooler pipe to frame.
CAUTION:
Be careful not to bend the A/C pipe, when installing the ATF cooler pipe.
2) Install the A/C pipe to clip.
3) Lift up the vehicle.
4) Install the ATF cooler inlet and outlet pipes with new gaskets.
NOTE:
Use a new bolt for the converter case joint.
5) Install the oil charge pipe.
6) Connect the ATF cooler hose to the ATF cooler pipe on the transmission side.
NOTE:
^ Use a new ATF cooler hose.
^ Install so that the ATF cooler hose is not folded over, excessively bent or twisted.
^ Insert the ATF cooler hose to the specified position.
7) Connect the ATF cooler hose to the ATF cooler pipe on the radiator side.
NOTE:
^ Use a new ATF cooler hose.
^ Install so that the ATF cooler hose is not folded over, excessively bent or twisted.
^ Insert the ATF cooler hose to the specified position.
8) Install the front exhaust pipe.
9) Install the under cover.
10) Lower the vehicle.
11) Install the battery.
12) Fill ATF.
NOTE:
Make sure there are no ATF leaks in joints between the transmission, radiator, ATF cooler pipes, and ATF cooler hoses.
13) Install the collector cover.