Clear Memory Mode
Clear Memory ModeOPERATION
1. ECM
1. On the [[Main Menu]] display, select {Each System Check}.
2. On the [[System Selection Menu]], select {Engine Control System}.
3. After engine type information is displayed, select [OK].
4. On the [[Engine Diagnosis]], select {Clearing Memory}.
5. When "Done" is displayed on the display screen, end the Subaru Select Monitor and turn the ignition switch to OFF.
NOTE:
- Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.
- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
2. BODY INTEGRATED UNIT
1. On the [[Main Menu]] display, select {Each System Check}.
2. On the [[System Selection Menu]], select {Integ. Unit Mode}.
3. After {Integ. Unit Mode} is displayed, select [OK].
4. On the [[Integ. unit mode]], select {Clearing Memory}.
5. When "Done" is displayed on the display screen, end the Subaru Select Monitor and turn the ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".