Clear Memory Mode

Clear Memory Mode

OPERATION

1) On the [[Main Menu]] display screen, select the (Each System Check).
2) On the [[System Selection Menu]], select the (Brake Control System).
3) Click the [OK] button after the (VDC) is displayed.
4) On the [[Brake Control Diagnosis]] display screen, select the (Clearing Memory).
5) When the "Clear Memory?" is shown on the screen, click the "YES" button.
6) When "Done" and "Turn off the ignition switch" is shown on the display screen, turn the ignition switch to OFF.

NOTE:
For details concerning the operation procedure, refer to the "PC application help for Subaru Select Monitor".