Read Diagnostic Trouble Code (DTC)

Read Diagnostic Trouble Code (DTC)

OPERATION

1) On [[Main Menu]] display, select (Each System Check).
2) On [[System Selection Menu]] display, select (Brake Control System).
3) Click the [OK] button after (VDC) is displayed.
4) On [[Brake Control Diagnosis]] display, select (Diagnostic Code(s) Display).
5) Record the DTC and data.

NOTE:
^ For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
^ For details concerning DTCs, refer to "List of Diagnostic Trouble Code (DTC).
^ Up to 3 DTCs are displayed in the order of detection.





Inspection Mode

PROCEDURE

Reproduce the malfunction occurrence condition as much as possible.

Drive the vehicle at least ten minutes.

NOTE:
Make sure the vehicle is not dragged to one side under usual driving condition.