Read Diagnostic Trouble Code (DTC)

Read Diagnostic Trouble Code (DTC)

OPERATION

1) On the [[Main Menu]] display, select (Each System Check).
2) On the [[System Selection Menu]] display screen, select the (Brake Vacuum Pump System).
3) Click the [OK] button after the (3.6 DOHC) is displayed.
4) On the [[Brake Vacuum Pump Sys Diagnosis Menu]] display screen, select the (Diagnostic Code(s) Display).
5) Record the DTC and data.

NOTE:
^ For details concerning the operation procedure, refer to the "PC application help for Subaru Select Monitor".
^ For details concerning DTCs, refer to "List of Diagnostic Trouble Code (DTC)". Brake Vacuum Control (BVC) (Diagnostics)

Inspection Mode

PROCEDURE

Reproduce the malfunction occurrence condition as much as possible.
Drive the vehicle at least ten minutes.

Clear Memory Mode

OPERATION

1) On the [[Main Menu]] display, select (Each System Check).
2) On the [[System Selection Menu]] display screen, select the (Brake Vacuum Pump System).
3) Click the [OK] button after the (3.6 DOHC) is displayed.
4) On the [[Brake Vacuum Pump Sys Diagnosis]], select (Clearing Memory).
5) When the "Clearing Memory?" is shown on the screen, click the [YES] button.
6) When "Done" and "Turn ignition switch to OFF" are shown on the display screen, turn the ignition switch to OFF.

NOTE:
For details concerning the operation procedure, refer to the "PC application help for Subaru Select Monitor".