Radiator Main Fan

Radiator Main Fan and Fan Motor





REMOVAL

1) Remove the collector cover.
2) Disconnect the ground cable from battery.
3) Lift up the vehicle.
4) Remove the under cover.
5) Remove the bolts on the underside of the radiator stay.





6) Remove the bolts on the underside of the radiator fan shroud.





7) Lower the vehicle.
8) Remove the air intake duct.
9) Remove the front upper cover.





10) Remove the radiator upper brackets.





11) Remove the radiator stay.

1) Remove the latch.





2) Remove the radiator hose bracket.
3) Remove the clip holding the harness.
4) Remove the bolts on the left side of the radiator stay.





5) Remove the bolts on the right side of the radiator stay.





12) Disconnect the connector from radiator fan control unit.





13) Remove the reservoir tank.





14) Remove bolts on the upper side of radiator fan shroud.





15) Remove the radiator fan shroud.

NOTE:
When pulling up the radiator fan shroud, be careful not to damage the radiator hose or AFT hose.

INSTALLATION

CAUTION:
Check if the radiator hose and the over flow hose or ATF hose are properly connected.

1) Tighten the bolts on the top side of the radiator fan shroud.





2) Install the reservoir tank.





3) Connect the connector to radiator fan control unit.





4) Install the radiator stay.

1) Install the latch.





2) Connect the radiator hose brackets.
3) Hold the harness to the radiator stay with a clip.
4) Tighten the bolts on the left side of the radiator stay.





5) Tighten the bolts on the right side of the radiator stay.





5) Install the radiator upper brackets.





6) Install the front upper cover.





7) Install the air intake duct.
8) Lift up the vehicle.
9) Tighten the bolts on the lower side of the radiator stay.





10) Tighten the bolts on the lower side of the radiator fan shroud.





11) Install the under cover.
12) Lower the vehicle lift.
13) Connect the ground cable to battery.
14) Install the collector cover.

DISASSEMBLY

1) Remove the radiator main fan.





2) Remove the radiator main fan motor.





ASSEMBLY

Assemble in the reverse order of disassembly.